- Steel weight calculatorWeight of steel, stainless or aluminum plate, flat bar and round bar.
- Weld metal calculatorWeight of filler metal for a steel fillet weld of a given size and length.
- Welding heat input calculatorHeat input of an arc weld in kilojoules per inch from volts, amps and travel speed.
- Speeds and feeds calculatorSpindle RPM and feed rate for a drill or end mill from the cutting speed.
- Tap drill calculatorDrill size for tapping an inch thread at a chosen percentage of thread.
- Bolt circle calculatorStraight-line distance between holes equally spaced on a bolt circle.
- Bend allowance calculatorBend allowance and bend deduction for sheet metal, to find the flat length.
- Glass weight calculatorWeight of a pane of glass from its size and thickness.
- Pipe weight calculatorWeight of steel pipe or round tube from its outside diameter and wall.
- Shielding gas calculatorHours of welding from a cylinder of shielding gas at a given flow.
- Ring roll length calculatorFlat length of bar or plate to roll into a ring of a given inside diameter.
- Drill point length calculatorLength of the point on a twist drill, to drill to a full-diameter depth.
- Taper calculatorTaper per foot and angle from two diameters and a length.
- Sine bar calculatorHeight of gauge blocks to set a sine bar to an angle.
- Machining time calculatorCutting time from the length of cut, feed rate and number of passes.
- Cone layout calculatorFlat pattern for a cone or a tapered transition, from its diameters and height.
- Sheet metal gauge calculatorThickness and weight of steel sheet from its gauge number.
- Belt length calculatorLength of a belt round two pulleys.
- Pulley speed calculatorSpeed of a driven pulley from the driver.
- Gear ratio calculatorRatio and output speed of a pair of gears.
- Hydraulic cylinder force calculatorPush force of a hydraulic cylinder from its bore and the pressure.
See every category, or suggest a calculator that should be here.