Every Single CalculatorOne place for every calculator
ØWelding, machining, sheet metal and glass

Hydraulic cylinder force calculator

Push force of a hydraulic cylinder from its bore and the pressure.

Example: You are building a log splitter.

Your numbers

in
psi
  • Force0
  • In tons0
  • Piston area0

How it is worked out

Force = 3.1416 × (bore ÷ 2)² × pressure

A worked example

A 4 inch cylinder at 2,000 psi pushes with about 25,100 pounds, or 12.6 tons.

Good to know

  • This is the theoretical push. Rated loads and safe working pressures come from the cylinder maker.

How we know this calculator is right

Before this calculator went on the site, 3 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: mechanics.