Every Single CalculatorOne place for every calculator
◧Interior finishes

Steel stud calculator

Metal studs and track for a wall.

Example: You are framing a basement partition in metal stud.

Your numbers

Studs sit in a track at the floor and another at the ceiling.

ft
in
ft
  • Studs0
  • Pieces of track0
  • Track0

Steel stud calculator. Estimate from everysinglecalculator.com

Materials list
ItemBuyHow it was worked out

How it is worked out

Studs = wall length × 12 ÷ spacing, rounded up, + 1

Track = 2 × wall length

A worked example

A 20 foot wall at 16 inch centres takes 16 studs and 40 feet of track, which is 4 ten-foot pieces.

Good to know

  • Add studs for each door, corner and wall junction.
  • Gauge and maximum height for the stud size come from the maker's tables.

How we know this calculator is right

Before this calculator went on the site, 5 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: framers and carpenters, drywall hangers and finishers.