Every Single CalculatorOne place for every calculator
❋Exterior, landscape and paving

Parking lot striping calculator

Enter the number of stalls and the length of each line to find the paint for a row.

Example: A shop owner wants one row of 20 stalls repainted and you are pricing the paint.

Your numbers

A row of stalls needs one more line than it has stalls. Coverage is for a 4 inch line.

ft
ft
  • Paint needed0
  • Total line0
  • Lines to paint0

How it is worked out

Lines = stalls + 1

Gallons = lines × line length ÷ feet per gallon

A worked example

Twenty stalls need 21 lines. At 18 feet each that is 378 feet of line, or about 1.2 gallons at 320 feet a gallon.

Good to know

  • Coverage depends on the paint, the machine and the surface. Fresh sealcoat uses less than bare old asphalt.
  • Add arrows, stop bars, hatching and accessible stall markings separately.
  • Stall sizes and the number of accessible stalls are set by local code.

How we know this calculator is right

Before this calculator went on the site, 6 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: paving and sealcoating.