Every Single CalculatorOne place for every calculator
◧Interior finishes

Floor finish calculator

Gallons of polyurethane or floor finish for a number of coats.

Example: You have sanded an oak floor and are buying finish for three coats.

Your numbers

Coverage is on the can, usually 400 to 600 square feet a gallon.

ft
ft
sq ft
Drawn from your numbers. It redraws as you type.
  • Finish needed0
  • Or in quarts0
  • Floor area0

How it is worked out

Gallons = length × width × coats ÷ coverage per gallon

A worked example

A 15 by 12 foot floor is 180 square feet. Three coats at 500 square feet a gallon take 1.08 gallons.

Good to know

  • The first coat on bare wood soaks in and covers less.
  • Buy it all from one batch so the sheen matches.

How we know this calculator is right

Before this calculator went on the site, 5 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: cabinetmakers and woodworkers, painters, flooring installers.