Every Single CalculatorOne place for every calculator
♞Hobbies and sport

String tension calculator

The pull on a guitar or bass string at pitch.

Example: You are choosing string gauges for a different tuning.

Your numbers

in
Hz
  • Tension0
  • In kilograms0
  • In newtons0

How it is worked out

Tension = unit weight × (2 × scale length × frequency)² ÷ 386.4

A worked example

A plain .010 high E on a 25.5 inch scale pulls about 16 lb.

Good to know

  • String makers publish the unit weight of each gauge. A plain steel .010 is about 22.15.

How we know this calculator is right

Before this calculator went on the site, 2 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: hobbies and sport.