Every Single CalculatorOne place for every calculator
∟Framing and carpentry

Wall sheathing calculator

Enter the size of your exterior walls to find how many sheets of sheathing and rolls of house wrap to buy.

Example: The walls are framed and you need OSB and house wrap for the whole house on one delivery.

Your numbers

A common roll of house wrap is 9 feet by 100 feet, which is 900 square feet. Wrap goes straight across openings and is cut out afterwards, so openings are not taken off it.

ft
ft
sq ft
Total area of openings.
%
sq ft
  • Sheets of sheathing0
  • Rolls of house wrap0
  • Wall area after openings0
  • Total wall area0

Wall sheathing calculator. Estimate from everysinglecalculator.com

Materials list
ItemBuyHow it was worked out

How the amounts are worked out

Sheets = (wall length × height − openings) × (1 + waste) ÷ 32

A worked example

A house with 140 feet of wall, 9 feet high, has 1,260 square feet of wall. Taking out 192 square feet of doors and windows leaves 1,068. With 10% waste that takes 37 sheets of 4 by 8. The wrap covers the full 1,260 plus waste, which is 2 rolls of 900 square feet.

Good to know

  • Many framers sheathe straight over the openings and cut them out afterwards. If you work that way, set the openings to 0.
  • For 9 and 10 foot walls, taller sheets save a horizontal joint and the blocking behind it.
  • Structural sheathing braces the building against wind. The nailing pattern and which walls need it are set by code.
  • House wrap also needs seam tape and cap fasteners, and flashing tape around every opening.

Common questions

Do gable ends need sheathing?

Yes. Work out each triangle as its width times its height divided by 2, divide by 32 and add that many sheets to the total.

How we know this calculator is right

Before this calculator went on the site, 7 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: framers and carpenters, siding and gutter installers.