How the volume is worked out
Cubic yards = length × height × (thickness ÷ 12) ÷ 27
A worked example
Forty feet of wall, 8 feet high and 8 inches thick, is 213 cubic feet. With 10% extra that is 235 cubic feet, or 8.7 cubic yards. That is a ready-mix order, close to a full truck.
Good to know
- Take large door and window openings out by reducing the length, but keep the waste figure. Forms bulge slightly and some concrete always stays in the pump and the truck.
- Wall thickness, reinforcing and the footing underneath come from your code or an engineer.
- Tall walls are poured in lifts and vibrated so the concrete fills round the rebar without blowing out the forms.
- The footing is separate. Use the footing calculator for that.
Common questions
How much does a truck carry?
A standard ready-mix truck carries about 8 to 10 cubic yards. Orders just over a truckload often cost noticeably more, so ask the plant.
How we know this calculator is right
Before this calculator went on the site, 7 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.