Every Single CalculatorOne place for every calculator
∟Framing and carpentry

Deck railing calculator

Posts, balusters and rail for a run of deck railing.

Example: You are pricing railing round three sides of a deck.

Your numbers

Baluster gaps must stay under 4 inches in most codes, so a 4 inch ball cannot pass.

ft
ft
in
in
  • Balusters0
  • Posts0
  • Top and bottom rail0

Deck railing calculator. Estimate from everysinglecalculator.com

Materials list
ItemBuyHow it was worked out

How it is worked out

Balusters = railing length in inches ÷ (baluster width + gap)

Posts = length ÷ post spacing, rounded up, + 1

A worked example

Forty feet of railing is 480 inches. With 1½ inch balusters and 3½ inch gaps, each takes 5 inches, so 96 balusters. Posts every 6 feet makes 8.

Good to know

  • Railing height, post fixing and baluster gaps are safety items set by code. Check before you build.
  • For even gaps in one section, use the baluster spacing calculator.

How we know this calculator is right

Before this calculator went on the site, 6 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: framers and carpenters, deck and fence builders.