Every Single CalculatorOne place for every calculator
λPhysics

Young's modulus calculator

Stress, strain and stiffness from a pull test.

Example: You are working up tensile test results.

Your numbers

N
mm²
m
mm
  • Young's modulus0
  • Stress0
  • Strain0

How it is worked out

E = stress ÷ strain = (F ÷ A) ÷ (ΔL ÷ L)

A worked example

1,000 N on 100 mm² is 10 MPa. A 1 mm stretch in 2 m is 0.05% strain. The modulus is 20 GPa.

How we know this calculator is right

Before this calculator went on the site, 6 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: physics.