Every Single CalculatorOne place for every calculator
</>Tech, screens and electronics

3D print electricity cost calculator

Electricity a 3D print uses.

Example: You are pricing prints you sell.

Your numbers

W
hours
$
  • Electricity cost0
  • Energy used0

How it is worked out

Cost = watts × hours ÷ 1,000 × price per kWh

A worked example

A 150 W printer running 10 hours uses 1.5 kWh, about 23 cents.

How we know this calculator is right

Before this calculator went on the site, 3 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: tech and screens.