Every Single CalculatorOne place for every calculator
❋Exterior, landscape and paving

Pool salt calculator

Enter the pool volume, the current salt level and the target to find how much salt to add.

Example: You have just filled a customer's pool and need to load the truck with the right number of salt bags.

Your numbers

Most salt systems want about 3,200 parts per million. The right figure is in the manual for your cell.

gal
ppm
ppm
lb
  • Salt to add0
  • Bags0
  • Increase needed0

How it is worked out

Pounds of salt = gallons × 8.345 × increase in ppm ÷ 1,000,000

A worked example

A new 10,000 gallon pool with no salt needs 10,000 × 8.345 × 3,200 ÷ 1,000,000, which is 267 pounds, or 7 bags of 40 pounds.

Good to know

  • Add about three quarters of the amount, let it circulate for a day, test, then top up. It is easy to add and hard to take out.
  • Use pool salt, not rock salt or salt with additives.
  • The pool volume calculator finds the gallons.

How we know this calculator is right

Before this calculator went on the site, 7 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: pool builders and service.