Every Single CalculatorOne place for every calculator
ΩPlumbing, HVAC and electrical

LED savings calculator

Yearly energy and money saved by swapping old bulbs for LEDs.

Example: A shop owner asks whether relamping the showroom is worth it.

Your numbers

Use the watts printed on each bulb, not the "equivalent" figure.

W
W
h
$
  • Saved per year0
  • Energy saved per year0

How it is worked out

kWh saved = bulbs × (old watts − new watts) × hours per day × 365 ÷ 1,000

A worked example

Ten 60 watt bulbs swapped for 9 watt LEDs, on 5 hours a day, save 931 kilowatt-hours a year. At 15 cents that is about $140.

Good to know

  • Divide the cost of the new bulbs by the yearly saving to get the payback in years.

How we know this calculator is right

Before this calculator went on the site, 4 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: electricians, homeowners.