Every Single CalculatorOne place for every calculator
❋Exterior, landscape and paving

Fill dirt calculator

Enter the area and depth to fill to find how much loose fill to order.

Example: You are raising a low corner of a yard 6 inches before laying sod and need to order the dirt.

Your numbers

Loose fill packs down when it is compacted, so you order more than the hole measures. The allowance depends on the soil.

ft
ft
in
%
cu yd
Drawn from your numbers. It redraws as you type.
  • Fill to order0
  • Compacted in place0
  • Truckloads0

Fill dirt calculator. Estimate from everysinglecalculator.com

Materials list
ItemBuyHow it was worked out

How it is worked out

Fill to order = length × width × (depth ÷ 12) ÷ 27 × (1 + compaction allowance)

A worked example

An area 20 by 10 feet filled 6 inches deep is 3.7 cubic yards in place. With 20% for compaction, order 4.4 yards.

Good to know

  • Place fill in thin layers and compact each one. Fill dumped in one deep lift settles for years.
  • Fill under a slab or a building needs to meet the engineer's or the code's compaction standard.
  • Sandy fill packs less than clay. Ask the pit what they allow for theirs.

How we know this calculator is right

Before this calculator went on the site, 7 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: concrete contractors, landscapers, excavation and grading.