Every Single CalculatorOne place for every calculator
ΩPlumbing, HVAC and electrical

Dew point calculator

Dew point from the air temperature and relative humidity.

Example: You are about to coat a garage floor and need to know whether the slab is too close to the dew point.

Your numbers

Surfaces colder than the dew point will sweat.

°F
%
  • Dew point0
  • In Celsius0
  • Below the air temperature by0

How it is worked out

The Magnus formula: γ = ln(RH ÷ 100) + 17.625 × T ÷ (243.04 + T), dew point = 243.04 × γ ÷ (17.625 − γ), with T in °C

A worked example

Air at 70°F and 50% humidity has a dew point of about 50.5°F. A duct or pipe colder than that will drip.

Good to know

  • Flooring, coatings and spray foam all have dew point limits. A common rule is to keep the surface at least 5°F above it.
  • At 100% humidity the dew point equals the air temperature.

How we know this calculator is right

Before this calculator went on the site, 4 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: painters, flooring installers, hvac technicians, insulation installers.