Every Single CalculatorOne place for every calculator
</>Tech, screens and electronics

LED strip power calculator

Power supply needed for a run of LED strip.

Example: You are lighting a desk or a shelf.

Your numbers

m
W
V
%
  • Power supply to look for0
  • Strip draws0
  • Current0

How it is worked out

Power = length × watts per meter, plus headroom

A worked example

Five meters at 14.4 W a meter draws 72 W, 6 amps at 12 V. With 20% in hand, look for an 86 W supply.

Good to know

  • Long runs need power fed in at both ends, and wire sized for the current. Use a listed power supply.

How we know this calculator is right

Before this calculator went on the site, 5 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: tech and screens.