Every Single CalculatorOne place for every calculator
÷Everyday math

Decimal to fraction calculator

Enter a measurement in decimal inches to see it as a fraction you can find on a tape measure.

Example: A calculator gives you 14.6875 inches and you need to find that on a tape.

Your numbers

Calculators and plans often give inches as a decimal. A tape is marked in sixteenths, and a machinist rule in sixty-fourths.

in
  • Nearest sixteenth0
  • Nearest thirty-second0
  • Nearest sixty-fourth0
  • In millimeters0
  • Sixteenths in total0

How the fraction is worked out

Multiply the decimal part by 16 and round to the nearest whole number. That is how many sixteenths you have. Then reduce the fraction.

Sixteenths = decimal × 16, rounded

A worked example

0.6875 × 16 is exactly 11, so 0.6875 inches is 11/16. For 2.3 inches, 0.3 × 16 is 4.8, which rounds to 5, so it is 2 5/16 inches. To the nearest sixty-fourth it is 2 19/64.

Decimals worth knowing

  • 1/16 is 0.0625, 1/8 is 0.125 and 3/16 is 0.1875.
  • 1/4 is 0.25, 3/8 is 0.375 and 1/2 is 0.5.
  • 5/8 is 0.625, 3/4 is 0.75 and 7/8 is 0.875.

Common questions

What about decimal feet?

Multiply the decimal part of the feet by 12 to get inches first. 8.4 feet is 8 feet and 4.8 inches, which is 8 feet 4 13/16 inches. The length conversion calculator does that in one step.

How we know this calculator is right

Before this calculator went on the site, 14 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: framers and carpenters, finish carpenters, cabinetmakers and woodworkers, glaziers, welders and fabricators, machinists, sheet metal workers, mechanics, unit conversions.