How it is worked out
Panel width = (wall length − (panels + 1) × stile width) ÷ panels
A worked example
A 12 foot wall is 144 inches. Four panels have five stiles of 3½ inches, which take 17½ inches. The other 126½ inches split into four panels of 31⅝ inches.
Good to know
- Try different panel counts until the width looks right for the room. Panels a little taller than they are wide usually look best.
- Lay out each wall on its own. Try to keep panel widths close from wall to wall.
- Watch for outlets and switches landing on a stile and adjust before you nail.
How we know this calculator is right
Before this calculator went on the site, 6 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.