Every Single CalculatorOne place for every calculator
ΩPlumbing, HVAC and electrical

AC running cost calculator

Electricity an air conditioner uses over a season, from its size and SEER.

Example: A customer wants to know what a SEER 18 unit would save over their old SEER 10.

Your numbers

SEER is cooling output in BTU divided by watt-hours used. Higher is cheaper to run.

BTU/h
h
$
  • Cost per season0
  • Energy used0
  • Average draw0

How it is worked out

kWh = BTU per hour ÷ SEER ÷ 1,000 × hours

Cost = kWh × price

A worked example

A 2 ton unit is 24,000 BTU. At SEER 14 it draws about 1,714 watts. Over 8 hours a day for 120 days that is 1,646 kilowatt-hours, about $247.

Good to know

  • Run it twice with two SEER figures to see what an upgrade saves.
  • Real use depends on the weather, the house and the thermostat.

How we know this calculator is right

Before this calculator went on the site, 5 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: hvac technicians, homeowners.