Every Single CalculatorOne place for every calculator
◧Interior finishes

Spray foam calculator

Enter the area to insulate and how thick you want the foam to find the board feet you need and the number of kits.

Example: You are sealing the rim joists in a basement and want to know whether one 200 board foot kit is enough.

Your numbers

Spray foam is sold by the board foot, which is one square foot at one inch thick. A kit labelled 600 covers 600 square feet at one inch in ideal conditions.

sq ft
in
board ft
%
Real yield is usually below the label.
  • Board feet to buy0
  • Kits0
  • Board feet before waste0

Spray foam calculator. Estimate from everysinglecalculator.com

Materials list
ItemBuyHow it was worked out

How the amount is worked out

Board feet = area × thickness in inches × (1 + waste)

A worked example

One thousand square feet at 2 inches thick is 2,000 board feet. With 10% for waste that is 2,200, which takes 4 kits of 600 board feet.

Good to know

  • Closed-cell foam gives roughly R-6 to R-7 per inch and resists moisture. Open-cell gives about R-3.5 to R-4 per inch and is softer and cheaper.
  • Kit yield drops sharply if the tanks or the surface are cold. Follow the temperature range on the kit.
  • Most foams must be covered by drywall or another approved barrier for fire safety. Check your code.
  • Spraying foam needs a respirator, eye protection, full skin cover and good ventilation. The fumes are hazardous until it cures.

Common questions

When is a contractor cheaper than kits?

For more than a few hundred board feet, a spray rig is usually cheaper per board foot than disposable kits. Kits suit rim joists and small jobs.

How we know this calculator is right

Before this calculator went on the site, 6 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: insulation installers.