Every Single CalculatorOne place for every calculator
∟Framing and carpentry

Gable area calculator

Area of the triangle at the end of a gable roof, for siding, sheathing or paint.

Example: You are siding a house and need to add the two gable ends to the wall area.

Your numbers

The width is the wall under the gable. The rise comes from the roof pitch.

ft
  • Total gable area0
  • Each gable0
  • Height of the gable0

How it is worked out

Height = width ÷ 2 × pitch ÷ 12

Area = width × height ÷ 2

A worked example

A 24 foot wide gable under a 6/12 roof is 6 feet tall. Its area is 24 × 6 ÷ 2, or 72 square feet. Two of them make 144.

Good to know

  • Cutting to the slope wastes more than a square wall. Allow 15% on gables.

How we know this calculator is right

Before this calculator went on the site, 5 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: roofers, framers and carpenters, siding and gutter installers.