How the amount is worked out
Find the volume of the joint in cubic inches and divide by the volume of a cartridge. A fluid ounce is 1.805 cubic inches, so a 10.1 ounce cartridge holds 18.2.
Cartridges = length × 12 × width × depth ÷ 18.2
A worked example
One hundred feet of joint a quarter inch wide and a quarter inch deep is 75 cubic inches. That is 4.1 cartridges, so you buy 5. One cartridge does about 24 feet of that joint.
Good to know
- Doubling the width or the depth doubles the caulk. A half inch by quarter inch joint gets only 12 feet from a cartridge.
- Joints deeper than about half an inch should be packed with backer rod first. It saves sealant and lets the bead flex as it should.
- A bead tooled into a corner is roughly triangular and uses about half the figure here.
- Sausage packs and 28 ounce cartridges are cheaper per ounce for big jobs. Change the cartridge size to match.
Common questions
How much do I need round a window?
Add up the perimeter. A 3 by 5 foot window is 16 feet, which is well under one cartridge for a quarter inch bead.
How we know this calculator is right
Before this calculator went on the site, 6 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.