How the amount is worked out
Product per 1,000 sq ft = nitrogen wanted ÷ (nitrogen percent ÷ 100)
A worked example
To put down 1 pound of nitrogen per 1,000 square feet with a 20-0-5 fertilizer, you need 1 ÷ 0.20, which is 5 pounds of product per 1,000 square feet. A 1,500 square foot lawn takes 7.5 pounds.
Good to know
- More is not better. Too much nitrogen burns the grass and washes into streams and groundwater.
- Many areas restrict phosphorus or the dates when lawn fertilizer may be applied. Check local rules.
- Set the spreader from the chart on the bag, then check it by spreading a known weight over a measured area.
- A soil test tells you what the lawn needs. Extension offices run them cheaply.
Common questions
How many times a year should I fertilize?
It depends on the grass and climate. Two to four applications in the growing season is typical. A local extension office publishes a schedule for your area.
How we know this calculator is right
Before this calculator went on the site, 9 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.