How it is worked out
Box width = opening width − 2 × slide clearance
Box height = opening height − clearance
A worked example
A 15 inch opening with ½ inch slides takes a box 14 inches wide. In a 6 inch tall opening, make it 5 inches high.
Good to know
- Undermount slides use different clearances and need a set box width. Use the maker's chart.
- A box even a sixteenth too wide binds. Measure the opening at the front and the back.
How we know this calculator is right
Before this calculator went on the site, 3 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.