How the amount is worked out
Gallons = (deck floor + railings) × coats ÷ coverage per gallon
A worked example
A 16 by 12 foot deck has 192 square feet of floor. Forty feet of railing adds about 240 square feet, because balusters have a lot of surface. That is 432 square feet. Two coats at 200 square feet per gallon is 4.3 gallons, so you buy 5.
Good to know
- Old, weathered wood soaks up far more than new wood. Expect the low end of the coverage range on the first coat.
- Many penetrating stains are one-coat products. Follow the can, because a second coat that cannot soak in stays sticky.
- Clean the deck and let it dry for a couple of days before staining.
- Stairs, skirting and the edges of the boards all add area. Round up.
Common questions
How long before I can stain a new deck?
Pressure-treated wood needs to dry first, often several weeks. Sprinkle water on it. If the water soaks in, it is ready. If it beads, wait.
How we know this calculator is right
Before this calculator went on the site, 9 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.