How it is worked out
Sidewall = width × aspect ratio ÷ 100 ÷ 25.4
Diameter = wheel diameter + 2 × sidewall
A worked example
A 225/65R17 has a sidewall of 225 × 0.65 ÷ 25.4, or 5.76 inches. Twice that plus the 17 inch wheel is 28.5 inches tall.
Good to know
- A taller tire makes the speedometer read low. The error is the difference in diameter as a percentage.
- Actual sizes vary a little by maker and wear.
- Load rating and speed rating must match the vehicle. They are not part of this sum.
How we know this calculator is right
Before this calculator went on the site, 8 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.