How the count is worked out
Divide the floor length by the joist spacing and add one for the joist at the end. The rim boards run along both ends of the joists, so they total twice the floor length.
Joists = floor length × 12 ÷ spacing, rounded up, + 1
Subfloor sheets = floor area × (1 + waste) ÷ 32
A worked example
A floor 24 feet long with joists every 16 inches is 288 inches, which is 18 spaces, so 19 joists. Each is 14 feet long. The rim board is 48 feet. The floor is 336 square feet, and with 5% waste that takes 12 sheets of 4 by 8 subfloor.
Good to know
- Joist size depends on span, spacing, wood species and grade, and the load on the floor. Use the span tables in your code or have the floor designed. Never guess.
- Add extra joists under walls that run parallel to the joists, under bathtubs and around stair openings.
- Subfloor is usually ¾ inch tongue and groove, glued and screwed or nailed, laid across the joists with the end joints staggered.
- Blocking or bridging at mid-span is extra to the figures here.
Common questions
16 or 24 inch spacing?
Sixteen is the common default for dimensional lumber. Engineered I-joists are often spaced at 19.2 or 24 inches. Closer spacing makes a stiffer floor.
Does this work for a deck?
The joist count does. Deck boards are covered by the deck board calculator.
How we know this calculator is right
Before this calculator went on the site, 8 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.