Every Single CalculatorOne place for every calculator
ΩPlumbing, HVAC and electrical

Generator wattage calculator

Running and starting watts for a list of things to power.

Example: You are choosing a portable generator for a job site or an outage.

Your numbers

Use the watts printed on each appliance. Connecting a generator to house wiring needs a transfer switch fitted by an electrician. Never run one indoors or in a garage.

W
W
W
W
W
Drawn from your numbers. It redraws as you type.
  • Peak watts needed0
  • Running watts0
  • With 20% in hand0

How it is worked out

Peak = total running watts + the largest starting surge

A worked example

A fridge, a sump pump and some lights run at 2,300 watts. The pump needs 1,800 more to start, so the peak is 4,100.

Good to know

  • Use the watts printed on each appliance. Connecting a generator to house wiring needs a transfer switch fitted by an electrician. Never run one indoors or in a garage.

How we know this calculator is right

Before this calculator went on the site, 6 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: electricians.