Every Single CalculatorOne place for every calculator
mpgVehicles, fuel and shipping

Compression ratio calculator

Static compression ratio from the bore, stroke and clearance volume.

Example: You are choosing head gaskets for a rebuild and want to see what each does to compression.

Your numbers

Clearance volume is everything above the piston at the top: chamber, head gasket, deck and any dish.

in
in
cc
cc
Drawn from your numbers. It redraws as you type.
  • Compression ratio0
  • Swept volume, one cylinder0
  • Clearance volume0

How it is worked out

Compression ratio = (swept volume + clearance volume) ÷ clearance volume

A worked example

A 4.00 by 3.48 inch cylinder sweeps 716.6 cc. With a 64 cc chamber and 10 cc more in the gasket and deck, the ratio is (716.6 + 74) ÷ 74, or 10.7 to 1.

Good to know

  • A domed piston takes away from the clearance volume. Enter its dome as a negative number in the last box.
  • Measure chamber volume with a burette. Catalogue figures are often a few cc off.

How we know this calculator is right

Before this calculator went on the site, 4 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: mechanics.