Every Single CalculatorOne place for every calculator
ΩPlumbing, HVAC and electrical

Fill time calculator

How long it takes to fill a pool, tank or pond at a given flow.

Example: A customer asks how long the hose needs to run to fill the new pool.

Your numbers

Find your flow with a bucket and a watch.

gal
gpm
  • Time to fill0
  • In minutes0
  • In days0

How it is worked out

Hours = gallons ÷ gallons per minute ÷ 60

A worked example

A 15,000 gallon pool filled at 8 gallons a minute takes 1,875 minutes, a little over 31 hours.

Good to know

How we know this calculator is right

Before this calculator went on the site, 3 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: plumbers and pipefitters, irrigation installers, pool builders and service.