Every Single CalculatorOne place for every calculator
☘Grounds, cleaning and farm

Dilution ratio calculator

Enter the size of the bottle or tank and the dilution ratio on the label to find how much product and water to use.

Example: A degreaser label says dilute 1 to 10 and you are filling a quart spray bottle.

Your numbers

A ratio of 1 to 10 here means 1 part product to 10 parts water.

oz
Drawn from your numbers. It redraws as you type.
  • Product0
  • Water0
  • Strength of the mix0
  • Product per gallon of mix0

How it is worked out

Product = container size ÷ (ratio + 1)

Water = container size − product

A worked example

For a 32 ounce spray bottle at 1 to 10: 32 ÷ 11 is 2.9 ounces of product, topped up with 29.1 ounces of water.

Good to know

  • Some labels mean 1 part in 10 total. Read yours. If so, enter one less than the number on the label.
  • Put the water in first, then the product, to cut foaming and splashing.
  • A gallon is 128 ounces and a quart is 32. Follow the label and its safety directions for anything you mix.

How we know this calculator is right

Before this calculator went on the site, 8 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: pool builders and service, cleaning and janitorial, pest control and spray technicians.