Every Single CalculatorOne place for every calculator
❋Exterior, landscape and paving

Topsoil calculator

Cubic yards, tons and bags of topsoil for an area and depth.

Example: You are top-dressing a new lawn area before seeding.

Your numbers

Lawns want 4 to 6 inches of topsoil, beds 8 to 12.

ft
ft
in
cu ft
Drawn from your numbers. It redraws as you type.
  • Topsoil needed0
  • In tons0
  • Or in bags0
  • In cubic feet0

Topsoil calculator. Estimate from everysinglecalculator.com

Materials list
ItemBuyHow it was worked out

How it is worked out

Cubic yards = length × width × (depth ÷ 12) ÷ 27

A worked example

An area 30 by 20 feet covered 4 inches deep takes 200 cubic feet, which is 7.4 cubic yards or about 8 tons.

Good to know

  • Weight depends on moisture. Wet topsoil can be a third heavier.
  • Order a little over. It settles as it is watered in.

How we know this calculator is right

Before this calculator went on the site, 7 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: landscapers, excavation and grading.