How it is worked out
Runtime = amp-hours × volts × usable share ÷ load in watts
A worked example
A 100 amp-hour 12 volt battery holds 1,200 watt-hours. Using half, a 120 watt load runs for 5 hours.
Good to know
- Through an inverter, allow about 10 to 15% more for its losses.
- Heavy loads and cold weather both shorten the real figure.
How we know this calculator is right
Before this calculator went on the site, 5 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.