How it is worked out
Current = k × rise^0.44 × area^0.725, with k = 0.048 outside and 0.024 inside
A worked example
1 amp with a 10 °C rise on 1 oz outer copper needs a track about 12 mil wide.
Good to know
- From the IPC-2221 charts. Leave a margin, and follow your board maker's minimums.
How we know this calculator is right
Before this calculator went on the site, 4 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.