How it is worked out
Heads per zone = usable flow ÷ flow of one head, rounded down
Zones = heads ÷ heads per zone, rounded up
A worked example
With 10 gallons a minute and 80% of it used, each zone has 8. Heads at 3 gallons a minute fit 2 to a zone, so 12 heads need 6 zones.
Good to know
- Find the supply with the flow rate calculator.
- Keep sprays and rotors on separate zones.
How we know this calculator is right
Before this calculator went on the site, 6 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.