Every Single CalculatorOne place for every calculator
ΩPlumbing, HVAC and electrical

Duct velocity calculator

Enter the airflow and the size of the duct to find how fast the air is moving through it.

Example: A bedroom register whistles. Check how fast 150 CFM is moving through a 6 inch duct.

Your numbers

Velocity is airflow divided by the area of the duct. Sizes are inside dimensions, in inches.

CFM
in
in
in
  • Air velocity0
  • Duct area0
  • Duct area0

How the velocity is worked out

Feet per minute = CFM ÷ duct area in square feet

A worked example

Four hundred CFM through a 10 inch round duct, which has an area of 0.545 square feet, moves at 733 feet per minute. The same air through a 12 by 8 inch rectangular duct moves at 600.

Good to know

  • Fast air is noisy. Commonly used targets for houses are roughly 600 to 900 feet per minute in main trunks and under about 600 in branch runs, with return air slower still.
  • If the velocity is too high, use a larger duct. Going from 6 to 8 inches nearly halves the speed.
  • Flex duct, long runs and tight elbows add resistance, so the fan delivers less air than this calculation assumes.
  • This is a check on a size you already have in mind. Designing a duct system properly uses friction rate and the equipment's available pressure.

Common questions

How do I find the airflow a room needs?

For ventilation, the CFM calculator works it out from room size and air changes.

How we know this calculator is right

Before this calculator went on the site, 5 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: hvac technicians, sheet metal workers.