Every Single CalculatorOne place for every calculator
❋Exterior, landscape and paving

Fence stain calculator

Gallons of stain or paint for a fence.

Example: You are quoting a stain job on a privacy fence.

Your numbers

Rough-sawn boards soak up far more than smooth ones. Check the can for both figures.

ft
ft
sq ft
Drawn from your numbers. It redraws as you type.
  • Stain needed0
  • Area to cover0

How it is worked out

Gallons = length × height × sides × coats ÷ coverage

A worked example

One hundred feet of 6 foot fence, both sides, is 1,200 square feet. At 200 square feet a gallon that is 6 gallons.

Good to know

  • Spaced pickets have less face but more edges. The solid-wall figure is close enough.
  • Spraying wastes 20 to 30% as overspray.

How we know this calculator is right

Before this calculator went on the site, 4 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.

See every check
Numbers usedResultWorked out separatelyThis calculator

What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.

Used by: painters, deck and fence builders.