How it is worked out
Screws = rows of boards × joists × 2 × (1 + extra)
A worked example
A 16 by 12 foot deck has 26 rows of boards over 13 joists. Two screws at each crossing is 676, or 744 with 10% extra.
Good to know
- A pound of 2½ inch deck screws is roughly 85 to 100 screws. The box says.
- Hidden clip systems use one clip per joist per board instead.
How we know this calculator is right
Before this calculator went on the site, 6 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.