How the amount is worked out
Multiply the room length by its width, add an allowance for cuts and waste, then divide by what one box covers and round up.
Boxes = length × width × (1 + waste) ÷ box coverage
A worked example
A 12 by 12 foot room is 144 square feet. With 10% waste you need 158.4 square feet. At 20 square feet a box that is 7.9, so you buy 8 boxes. At $3.50 a square foot, 8 boxes cost $560.
Good to know
- You pay for whole boxes, so the cost figure is based on the boxes you buy, not the bare room area.
- Use 15% waste for a diagonal or herringbone layout, or for a room with many corners and doorways.
- Include closets and the floor under any appliance that will sit on the new flooring.
- Keep one unopened box after the job. Matching a discontinued floor later is hard.
- Wood and laminate need to sit in the room for a few days before fitting, and need an expansion gap at the walls. Follow the maker's instructions.
Common questions
What else do I need to buy?
Underlayment if the flooring does not have it attached, transition strips for doorways, and baseboard or quarter round to cover the gap at the walls.
How do I measure an L-shaped room?
Split it into two rectangles and run the calculator for each, or add the two areas with the square footage calculator.
How we know this calculator is right
Before this calculator went on the site, 8 answers were worked out separately from its code, by hand or straight from the formula above. Each time this page loads, your own browser runs the calculator on those same numbers and compares. Turn on JavaScript to see the comparison.
See every check
| Numbers used | Result | Worked out separately | This calculator |
|---|
What this proves: the calculator does the arithmetic of the formula shown, correctly. What it cannot prove: your measurements, or figures such as coverage per bag, waste and spacing, which are typical starting values you can change. Go by the product label and your local code.